TRILITES 994 This glove conforms to the provisions of directive 89/686/EEC for protection against chemical splashes or micro-organisms (for minor risks only). DESCRIPTION AND GENERAL PROPERTIES Liquidproof purple glove made of natural rubber latex, neoprene and nitrile blend. Ambidextrous design. Chlorinated glove surface. Beaded cuff end. Textured finger tips. Does not contain pigments, powder, silicone or paraffin. Conform to the FDA (Food and Drug Administration) regulation for pharmaceuticals and food contact. Thickness (in palm area) : 0.15 mm (nominal value) Length (all sizes) : 25.5cm (nominal value) Standard packaging : • 100 gloves in sealed polyethylene bag (99492) or in cardboard boxes (99495) • 10 bags or boxes per case PROTECTIVE VALUE The following information relates to qualification tests performed by the manufacturer. PROTECTION AGAINST SPLASHES OF CHEMICALS AND MICRO-ORGANISMS Liquidproof glove according to EN 374 standard. AQL (Acceptable Quality Level): 1.5% See splash degradation guide hereafter. These gloves are not designed for long duration contact nor i mmersion in chemicals, nor for protection against mechanical hazards. Avoid contact with petroleum solvents. These gloves conform to the provisions of EN 455. Total protein level below detection using modified Lowry assay . (ASTM D5712, EN 455-3). SPECIFIC ADVANTAGES • Unique triple polymer blend for enhanced comfort and resistance. • Protection against chemical splashes. • 99492 : low particule count maintained in sealed plastic bags. • Rolled cuff edge preventing tearing when donning and glove roll-down on the hand. • Optimal thickness delivering maximum tactility with superior durability. • 4 sizes available to fit all hands. • Natural rubber latex proteins levels below detection (Lowry test) reducing risk of becoming sensitized. • User traceability on inner bags and cartons. MAIN FIELDS OF USE Dry handling and splash protection in controlled environments. • Laboratories • Light assembly and sorting • Precision parts handling • Light maintenance INSTRUCTIONS FOR USE AND STORAGE For enhanced safety and service life of the gloves : • Store the gloves in their sealed packaging protected from direct sunlight, far from heat sources and electrical equipment. Maximum recommended storage time : 1 year. • It is not recommended to persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves. • Visually inspect while donning for imperfections. • Put the gloves on dry, clean hands, free of petroleum based lotions. • These gloves are designed for single use only. • If significant contact with a chemical occurs, remove the gloves immediately and dispose of them as appropriate. • If gloves have been contaminated with chemicals, do not touch the external side of the gloves when taking them off.