ULTRANITRIL 493 DESCRIPTION AND GENERAL PROPERTIES Liquidproof gloves made of green nitrile rubber. Internal layer made of white nitrile rubber. Curved fingers and contoured palm. Non-slip finish in palm and fingers area. Guaranteed silicone-free. Conform to the FDA (American Food and Drug Administration) regulation for food contact. Thickness (in wrist area) : 0.55 mm (nominal value) ULTRANITRIL 480 – 493 SPECIFIC ADVANTAGES • Higher resistance for an enhanced protection thanks to glove thickness. • Superior working life : excellent mechanical resistance (abrasion, puncture). • High chemical resistance to hydrocarbon derivatives and alcohols. good chemical resistance to aromatic and chlorinated solvents. • Safe grip of slippery objects thanks to non-slip finish. • Adapted for food handling. • Recommended for persons sensitized to natural rubber proteins. • Produits fabriqués dans une usine MAPA certifiée ISO 9001. MAIN FIELDS OF USE • Metal treatment using solvents. • Manufacture and application of paint and varnish. • Automotive industries • Chemical treatments. • Cleaning of printing press equipment • Electronics industry • Timber treatment and finishing INSTRUCTIONS FOR USE For enhanced safety and service life of the gloves : • Store the gloves in their original packaging protected from light, humidity and heat. • It is recommended to check that the gloves are suitable for the intended use,because the conditions of use at workplace may differ from the "CE"-type tests. • Persons sensitized to dithiocarbamates and thiazoles should not use these gloves. • Put the gloves on dry, clean hands. • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the chemical resistance chart hereafter or contact the Technical Customer Service - MAPA PROFESSIONNEL in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent. • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm. • Before taking off the gloves, clean them as appropriate : in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth. in use with a solvent (dilents, etc...) : rub over with a dry cloth. in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth Caution : improper use of the gloves or submitting them to any cleaning or laundering process can alter their performance levels. • Ensure the inside of the gloves is dry before putting them on again • Inspect the gloves for cracks or snags before reusing them.