INSTRUCTIONS |
TEMP-SEA 770
DESCRIPTION AND GENERAL PROPERTIES
Glove made of an acrylic terry knitted with an orange brushed jersey,
coated with blue PVC.
Standard packaging:
Single pack / 48 pairs per carton
SPECIFIC ADVANTAGES
· Acrylic curly fur assuming excellent insulation, downy for better comfort.
· Specially formulated liquid-proof PVC for coldest environmental
use (-30°C) and glove flexibility preservation.
· Enhanced grip properties and abrasion resistance.
· Good resistance to oil, grease and hydrocarbon.
· High resistance to ageing by U.V., light and ozone.
· Recommended for persons sensitized to natural rubber proteins.
MAIN FIELDS OF USE
· Sea and fishing working: fresh products
handling.
· Maintenance in wet environments /outsides.
· Warehouses: cold / wet handling.
· Skiing areas: maintenance, machines driving.
· Routine working in liquids
(water, oil, hydrocarbons …).
· Food industries: handling and
operations in cold stores.
INSTRUCTIONS FOR USE
For enhanced safety and service life of the gloves:
· Store the gloves in their original packaging protected from humidity and heat.
· It is recommended to check that the gloves are suitable for the intended use,
because the conditions of use at workplace may differ from the“CE ”-type tests.
· Put the gloves on dry, clean hands.
· Do not use the gloves in contact with a chemical for duration in excess of
the measured breakthrough time. Refer to the chemical resistance chart
hereafter or contact the Technical Customer Service - MAPA PROFESSIONNEL
in order to know this breakthrough time. Use 2 pairs alternatively when in
long duration contact with a solvent.
· Turn the cuff end down in order to prevent a hazardous chemical from
dripping onto the arm.
· Before taking off the gloves, clean them as appropriate :
in use with acids or alkalies : thoroughly rinse the gloves under
running water and rub over with a dry cloth.
Caution : improper use of the gloves or submitting them to a cleaning or
laundering process which is not specifically recommended can
alter their performance levels.
· Ensure the inside of the gloves is dry before putting them on again.
· Inspect the gloves for cracks or snags before reusing them. |